| Usage: | Telephone, Computer, Workstation, Server |
|---|---|
| Type: | Wired |
| Support Network: | Ethernet |
| Information content: | Data |
| Certification: | CE, ISO, RoHS |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | 1 | Rectifier module | Emerson /Vertiv | R48-1800A | |
| 2 | Rectifier module | Emerson /Vertiv | R48-2000A3 | |
| 3 | Rectifier module | Emerson /Vertiv | R48-2900U | |
| 4 | Rectifier module | Emerson /Vertiv | R48-3000e3 | |
| 5 | Rectifier module | Emerson /Vertiv | R48-3500e | |
| 6 | Rectifier module | Emerson /Vertiv | R48-5800A | |
| 7 | Rectifier module | Huawi | R4850N1 | |
| 8 | Rectifier module | Huawi | R4850G1 | |
| 9 | Rectifier module | Eltek | Flatpack2 48/2000 HE 241115.105 |
|
| 10 | Rectifier module | Eltek | Flatpack2 48/1000 HE 241122.105 |
|
| 11 | Rectifier module | Eltek | Flatpack2 48/3000 HE 241119.105 |
|
| 12 | Rectifier module | Eaton | APR24-3G | |
With the MPPT* algorithm ensuring close to 100% panel utilization and an efficiency up to 96.5%, the galvanic isolated solar charger sets new standards for renewable power in telecom.
The combination of innovative design, efficiency and reliability makes the Flatpack2 HE SOLAR stand out.
Applications
The Flatpack2 HE SOLAR charger is suitable for any telecom site with autonomous (solar only) or hybrid solar power. It can be used in parallel with any other Flatpack2 rectifiers feed by generator or unreliable mains on a hybrid side.
The Flatpack2 HE SOLAR charger is fully integrated with the standard Flatpack2 family which means it can be used in any 48V FP2 system solutions with "4AC" power shelves and Smartpack controller. Typically each charger is fed by one string of 4 to 6 solar panels. Galvanic isolation between solar panels and batteries/ telecom equipment provides high level of surge protection and reliability.
The Flatpack2 HE Solar module is CE marked and UL listed for world wide installations.
Product features and advantages
Maximum Peak Power Tracking (MPPT)
The charger uses a digitalized advan ced control algorithm that finds the solar panel voltage that generates the maximum power independent of sun availability. The charging is continuous according to performance profile for panels. In addition to finding the profiles peak power a full scan is performed at a fixed interval to stay on peak even with panel failures and major shadings. This gives close to 100% panel utilization.
Smartpack2 Controller
All standard control and monitoring features are available with solar charger plus additional feat ures like warnings for shaded/ dirty solar panels and energy monitoring.
Energy Logging
Integrated energy logging feature will monitor the power supplied from solar panels through the charger.
Energy log is stored on a historical basis in controller. The kWh or Wh supplied and consumed on site is stored on hourly, daily and weekly basis. Values can be seen 52 times back in time from the last log.
Generator Control
To minimize fuel consumption on a hybrid site the controller utilizes calculated backup capacity data and optional time delay to give start/ stop signals. Fuel tank level monitoring gives full visibility of consumption, theft and refill interval.
Forced charging can be triggered by daily time schedule, monthly periodical run time and emergency charge based on fast battery voltage drops. Charge mode during generator run is selectable between normal temperature compensated float charge and boost charge.
Flatpack2 48/ 1500 he solar solar charger module
| Voltage | Nominal: 170-230 VDC Tolerances: 8S-26S VOC | |
| Start-up voltage | 150VDC | |
| Maximum Current | 9.5 Arms maximum at nominal input and full load 10Arms maximum at 8SVOC and full load |
|
| Input protection | o Varistors for transient protection o Fuse in both lines o Reverse polarity |
|
| OUTPUT DATA | ||
| Voltage | Oefault: S3.SVDC | Float/Boost: 48 - S7.6 VDC For input voltages > 230VDC output stand by/test voltage is limited |
| Maximum Output Powef | 1S00 W. derating below 170V input | 800Wat 8&V input |
| Maximum Current | 31.3 Amps at 48 VOC | |
| Current Sharing | Passive, to optimize the power available from each string of solar panels | |
| Static voltage regulation* | ±0.5% from 10% to 100% load | |
| Dynamic voltage regulation* | ±5.0% for 10 -90% or 90 -10% load variation, regulation time < 50ms | |
| Ripple and Noise* | < 2S0 mV peak to peak;0 MHz bandwidth | < 2 mV rms psophometric |
| Output detection | Overvoltage shutdown;Hot pkjg*in • Inrush current limiting;Short circuit proof | High temperature protection; Fuse |
| ♦ 6*ted on power sopped not Hmited by sattrpwals | ||
| OTHER SPECIFICATIONS | ||
| Efficiency | >96% at 3080% load and 200VDC input | |
| Isolation | 3.0 KVAC - input and output 1.SKVAC • incut evlh | &SKVDC-output earth |
| Alarms | High temperature shutdown;Charger Failure;Overvoltaoe shutdown on output | Fan failureLow voltage alarm at 43.5V o CAN bus failure |
| Warnings | Low input voltage;Low temperature shutdown;Charger in power derate mode ;Remote battery current limit activated | Input voltage out of range, flashing at overvoltage;Loss of CAN communicatton with control unit, stand alone mode |
| Visual indkations | Green LEO: ON. no faults;Red LED: charoer failure | Yellow LEO: charger warning |
| Operating temp. | 40 to *7SK (-40 to bVt). dating linear above ^SSX (+131#F) to 1200W at *7S#C (+167*F) | |
| Storage temp. | 40 to ♦85<C (.40 to +18S,F) | |
| Cooling Fan (front to back airflow) | ||
| Fan Speed | Temperature arxJ current regulated | |
| MTBf | > 350.000 hours Telcordia SR-332 issue I. method 1 (a) (fmtmn: 2S*C) | |
| Acoustic Nocse | 20dBA at racranal input and full k)dd <= 25^Q&6dBA at rxKnindl input and full k)dd (fmtmn > 40^) | |
| Huntfty | Operatir>g5% to 95% RH non-condensing | Storage:0% to 99% RH norveondensing |
| Dimensions | 109x4tSx327mm(WxHxD)(4.25x 1.69x 139) | |
| Weight | 1.950 kg (4.3bs) | |
| APPLICABLE STANDARDS | ||
| Electrical safety | IEC 609SCM Ul 60950-1 | CSA22.2 |
| EMC | ETSIEN300 386 V.1.3.2 EN 61000*6*1 (immunity, light industry) | EN 6100&6-2 Ommunity. industry)EN 61000*6-3 (emission, tight irxlustry} EN 61000^-4 (emission indistey) |
| Environment | ETSJ EN 300019-2*1 Class 1.2 | ETSI EN 300132*2 |
| ETSI EN 300019-2-2 Class 2.3 ETSI EN 300019-2-3 Class 3.2 | RoHS compliant | |
| ORDERING INFORMATION | ||
| 24111S.6S0 | Flatpack2 48/1500 HE SOLAR | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}