LAN & USB Multi-Modular Cable Tester

• Certification: CE, ISO, RoHS
• Condition: New
• Warranty: 1 Year
• Transport Package: Carton Box
• Specification: As in description
• Trademark: None
• Model NO.: Cable Tester
• Origin: Hubei, China
• Production Capacity: 50000PCS/Year

Product Description

 

LAN & USB Multi-Modular Cable Tester

The LAN/USB Cable Tester is designed to easily read the correct cable pin out configuration.  
  The cables include of USB(A/A), USB(A/B), BNC,10Base-T,100Base-Tx,1000Base-TX, Token Ring, AT&T 258A, Coaxial, EIA / TIA568A / 568B and RJ11 / RJ12 modular cables.  
  You can use connect cable if you want to test BNC, Coaxial, RCA modular cables.  
  If you want to test cable installed far away either on patch panel or wall plate which can use the Remote terminator.  
  The LAN/USB Cable Tester tests RJ11/RJ12 cable, please use the appropriate adaptors RJ45, and follow the above procedure. So you can use it very easy and correct.  

 

Features

Operation:
1.Using the master tester, plug one end of the tested cable(RJ45/USB) to the marked with "TX" and another end of tested cable to the marked with "RX" or Remote terminator RJ45 / USB connector.
2.Turn the power switch to "TEST". In the step by step mode, the LED for pin 1 with light up, with each press of the "TEST" button, the LED will scroll in sequence, in the "AUTO" scan mode. the upper row of LEDs will begin to scroll in sequence from pin 1 to pin 8 and ground.
3.Reading the result of LED display. It tells you the correct status of the tested cable. If you read out the incorrect of LED display, the tested cable with the short, open, reversed, miswired and crossed.

Note: If the Battery Low power, the LEDs will be dimmed or no light and the test result will be incorrect. (Does not include battery)

Remote:
1.Using the master tester, plug one end of tested cable to the marked with "TX" jack and another end on the receiving of remote terminator, turn the power switch to auto mode and use the adapter cable if the cable terminates into a patch panel or wall plate.
2.The LED on the remote terminator will begin to scroll in relation to the master tester indicating the cable's pin out.

Warning: Please don't use in live circuits.

Related Products
 

Item No.	Name	Specification	Package	Ref.picture
T1001	Kevlar scissors	WL-9011Z	1PCS/BOX
T1008	Fiber optic cleaner	Clean SC/ST/FC Φ2.5mm adapters and ferrules	1 PC/Box
T1009	Fiber optic connector cleaner	Clean FC/SC/ST/E2000,LC/MU,MT etc.	2 PC/Box
T1010	Fiber Optic Stripper	For 125μm Fiber	1 PC/box
T1011	Fiber Optic Stripper	For 125/900μm Fiber	1 PC/box
T1012	Fiber Optic Stripper	For 3.0×2.0mm Fiber Cable	1 PC/box
T1014	Fiber optic slitter (Longitudinal type)	For stripping fiber optice tubes of 1.5~1.9 mm,2.0~2.4mm,2.5~2.9mm,3.0~3.3mm	1 PC/box
T1015	Fiber optic slitter (Transverse  type)	For stripping fiber 3.2mm-5.6mm	1 PC/box
T1017	Visual Fault Locator	20kM
T1021	Optical Fiber Identifier	80nm-1700nm	1PC/Box
T1022	Optical Power Meter	850/980/1300/1310/1490/1550/1625nm	1PC/Box
T1023	400 Times Optical Fiber Magnifier	To check SC-FC-ST	1PC/Box