Customization: | Available |
---|---|
Phase: | Single Phase |
Type: | On-line |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MODEL | UD10 / UD10L | UD15 / UD15L | UD20 / UD20L | UD30 / UD30L | UD40L | UD60L | UD80L | ||
Capacity (VA/Watts) | 10K / 9K | 15K / 13.5K | 20K / 18K | 30K / 27K | 40K / 36K | 60K / 54K | 80K / 72K | ||
INPUT | |||||||||
Nominal Voltage | 380/400/415Vac(3Ph+N+PE) | ||||||||
Operating Voltage Range | 208~478Vac@half load; 305~478Vac@full load | ||||||||
Operating Frequency Range | 50Hz:45~55Hz,60Hz:54~66Hz | ||||||||
Power Factor | ≥0.99 | ||||||||
Max.voltage: 220V:+25%(Optional +10%,+15%,+20% ) | |||||||||
Bypass Voltage Range | 230V:+20%(Optional +10%,+15%) | ||||||||
240V:+15%(Optional +10% ) | |||||||||
Min. voltage: -45% (Optional -10%, -20%,-30%) | |||||||||
ECO Range | Same as bypass | ||||||||
Harmonic Distortion (THDi) | ≤3%(100% non-linear load) | ||||||||
OUTPUT | |||||||||
Output Voltage | 380/400/415Vac(3Ph+N+PE) | ||||||||
Power Factor | 0.9 | ||||||||
Voltage Regulation | ±1% | ||||||||
Frequency | Line Mode | ±1%/±2%/±4%/±5%/±10% of the rated frequency(Optional) | |||||||
Bat. Mode | 50/60(1±0.1%)Hz | ||||||||
Crest Factor | 3:01 | ||||||||
Harmonic Distortion (THDv) | ≤2% with linear load | ||||||||
≤5% with non-linear load | |||||||||
Waveform | Pure Sinewave | ||||||||
Transfer Time | Utility to Battery : 0ms; Utility to Bypass: 0ms | ||||||||
EFFICIENCY | |||||||||
Efficiency | 95% | ||||||||
BATTERY | |||||||||
Battery | Standard unit | ±120Vdc (20pcs 12V9AH) | ±120Vdc (2x20pcs 12V9AH) | ±120Vdc (3x20pcs 12V9AH) | N/A | ||||
Voltage | Long run unit | Selectable Voltage:±96V/±108V/±120Vdc | Selectable Voltage:±192V/±204V/±216V/ ±228V/±240Vdc | ||||||
Charging | Standard unit | 1.35 | 2.7 | 4.05 | N/A | ||||
Current (A) | Long run unit | Max.current 10A | Max.current 15A | Max.current 30A | |||||
PROTECTI | ON | ||||||||
Line Mode | Load≤110%: last 60min, ≤125%: last 10min, ≤150%: last 1min, ≥150% turn to bypass mode immediately | ||||||||
Overload | Bat. Mode | Load≤110%: last 10min, ≤125%: last 1min, ≤150%: last 5S, ≥150% shut down UPS immediately | |||||||
Bypass Mode | 20A(Input breaker) | 32A(Input breaker) | 40A(Input breaker) | 63A(Input breaker) | 80A(Input breaker) | 100A(Input breaker) | 125A(Input breaker) | ||
Short Circuit | Hold Whole System | ||||||||
Overheat | Line Mode: Switch to Bypass; Backup Mode: Shut down UPS immediately | ||||||||
Battery Low | Alarm and Switch off | ||||||||
INDICATORS | |||||||||
Audible & Visual Alarms | Line Failure, Battery Low, Overload, System Fault | ||||||||
Status LED & LCD Display | Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault | ||||||||
Parameters On The LCD Panel | Input/Output Voltage, Input/Output Frequency, Load Level, Battery Level, Inner Temperature & Remaining Battery Backup Time | ||||||||
MANAGEMENT | |||||||||
Communication Interface | RS-232,RS-485,USB,Parallel card, SNMP card(Optional), Relay card (Optional),Battery temperature sentor(optional) | ||||||||
ENVIRONMENT | |||||||||
Operating Temperature | 0~40ºC | ||||||||
Storage Temperature | -25~55ºC | ||||||||
Humidity Range | 0~95% (Non-condensing) | ||||||||
Altitude | < 1500m | ||||||||
Noise Level | <55dB | <58dB | <63dB | ||||||
PHYSICAL | |||||||||
Dimension W×D×H (mm) | 250×828×868 | 360×828×868 | |||||||
Net Weight (kg) | 115/57 | 170/63 | 171/64 | 223/71 | 73 | 118 | 122 | ||
STANDARDS | |||||||||
Noise Suppression | Complies with EN62040-2 | ||||||||
Safety | IEC/EN62040-1,IEC/EN60950-1 | ||||||||
EMC | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, | ||||||||
IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 | |||||||||
Specifications are subject to change withour notice in advance |
Features
True double-conversion
Real-time digital signal processor (DSP) control
N+X parallel redundancy
Selectable quantity of battery for each group:for long run unit
Adjustable charging current via LCD
3-stage charging design optimizes battery performance
ECO mode operation for energy saving
Self-diagnosis at startup
Emergency power off function(EPO)
Maintenance bypass is convenient for maintenance
Generator compatible
Communications:RS-232,USB,SNMP card(Optional), Relay card (Optional)
Cold start
______________________________________________________
Wuhan Unique Mechanical And Electrical Equipment Co., LTD. is a high-tech enterprises with a combination of of science, industry and trade. We mainly engaged in R&D and manufacturing of network center room equipment, such as PDU, ODF, CMA, Fiber Spool Frame, Network Panel, Network Cabinet, OF Jointing Box, Fiber Optic Connector, ADSS Cable, Micro Fiber, Pigtail, Patch Cord, UTP Cable, etc. Provide high level of technical consultation and technical services.