| Customization: | Available |
|---|---|
| Type: | Fiber Accessories |
| Wiring Devices: | Fiber Accessories |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Taiwan Pro'sKit FB-1618C Precision fiber optic cleaver (4-in-1 clamp) with chip box
Features
• Standard precision cut single core fiber optic cable
• Easy to operate, lightweight design, suitable for fiber-to-home operations
| Product specifications | |
| FB-1618C | |
| Cutting angle | ≤0.8° |
| Applicable optical fiber | Single core optical fiber |
| Cutting diameter | 125um |
| Cutting length | 5-20 mm |
| Blade life | Over 36,000 cuts |
| Product Size | 98*62*55 mm |
| Product weight | 240g |
| Storage Box | PP(115*102*68 mm) |
| Common cutting problems and solutions | |
| Reasons for poor cutting end face: | |
| 1. The optical fiber is not placed straight on the cutting knife | |
| 2.Blade position is too high | |
| 3. Foreign matter remains on the optical fiber pressure pad | |
| 4. There is dust or foreign matter on the blade | |
| 5. There is dust or foreign matter on the optical fiber. | |
| Fault phenomenon | Failure causes and solutions |
| Optical fiber cuts continuously | 1. Clean the rubber pressure pad (such as alcohol, etc., do not use corrosive liquids) 2. Increase the height of the blade |
| Fiber edges have rounded corners | 1. Increase the height of the blade 2.If the rubber pressure pad is worn or aged, please replace the rubber pressure pad. |
| The fiber end face is shadowed or has a large slope | The blade is low, adjust the blade height |
| Fiber core defect | Core collapse is usually caused by the blade being too high. Lower the blade height. |
| Hscode | 8515809090 |
){kind=link}