| Customization: | Available |
|---|---|
| Type: | Fiber Accessories |
| Wiring Devices: | Fiber Accessories |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HDPE Micro Duct
Micro Ducts of high density polyethylene with HDPE as the main raw material, are the composite pipe with inner wall made of silicon material lining made by the advanced plastic extrusion forming technology, the inner wall of this duct is a solid permanent lubrication layer, which has self-lubricity and effectively reduce the friction resistance between the cable and duct when the cable is repeatedly extracting in the duct.
Optimizes system design and utilization
Available in various sizes
Single and multiple (bundled) configurations for specific project needs
Permanently lubricated with our unique Perma-LubeTM process for longer micro fiber cable installations
Variety of colors available for easy identification
Sequential foot or meter markings
Standard stock lengths for faster service
Custom lengths are also available
|
Item No. |
Raw Materials |
Physical and Mechanical Properties |
||||||||||||||||
|
Materials |
Melt Flow Index |
Density |
Environmental Stress Crack |
Outer Diameter |
Wall Thickness |
Inner Diameter Clearance |
Ovality |
Pressurization |
Kink |
Tensile Strength |
Heat Reversion |
Co-efficient of Friction |
Color and Printing |
Visual Appearance |
Crush |
Impact |
Min. Bend Radius |
|
|
DW-MD0535 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
5.0mm ± 0.1mm |
0.75mm ± 0.10mm |
A 3.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 50mm |
≥ 185N |
≤ 3% |
≤ 0.1 |
As per customer specification |
Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
||
|
DW-MD0704 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
7.0mm ± 0.1mm |
1.50mm ± 0.10mm |
A 3.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 70mm |
≥ 470N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD0735 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
7.0mm ± 0.1mm |
1.75mm ± 0.10mm |
A 3.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 70mm |
≥520N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD0755 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
7.0mm ± 0.1mm |
0.75mm ± 0.10mm |
A 4.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 70mm |
≥265N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD0805 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
8.0mm ± 0.1mm |
1.50mm ± 0.10mm |
A 3.5mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 80mm |
≥550N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD0806 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
8.0mm ± 0.1mm |
1.00mm ± 0.10mm |
A 4.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤ 80mm |
≥385N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1006 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
10.0mm ± 0.1mm |
2.00mm ± 0.10mm |
A 4.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤100mm |
≥910N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1008 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
10.0mm ± 0.1mm |
1.00mm ± 0.10mm |
A 6.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤100mm |
≥520N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1208 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
12.0mm ± 0.1mm |
2.00mm ± 0.10mm |
A 6.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤120mm |
≥1200N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1210 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
12.0mm ± 0.1mm |
1.00mm ± 0.10mm |
A 8.5mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤120mm |
≥620N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1410 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
14.0mm ± 0.1mm |
2.00mm ± 0.10mm |
A 8.5mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤140mm |
≥1350N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1412 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
14.0mm ± 0.1mm |
1.00mm ± 0.10mm |
A 9.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤140mm |
≥740N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD1612 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
16.0mm ± 0.15mm |
2.00 ± 0.10mm |
A 9.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤176mm |
≥1600N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
|
DW-MD2016 |
100% virgin HDPE |
≤ 0.40 g/10min |
0.940~0.958 g/cm3 |
Min. 96h |
20.0mm ± 0.15mm |
2.00 ± 0.10mm |
A 10.0mm steel ball can be blown freely through the duct. |
≤ 5% |
No damage and leakage |
≤220mm |
≥2100N |
≤ 3% |
≤ 0.1 |
As per customer specification |
||||
Related Products
Wuhan Unique Mechanical And Electrical Equipment Co., LTD. is a high-tech enterprises with a combination of of science, industry and trade. We mainly engaged in R&D and manufacturing of network center room equipment, such as PDU, ODF, CMA, Fiber Spool Frame, Network Panel, Network Cabinet, OF Jointing Box, Fiber Optic Connector, ADSS Cable, Micro Fiber, Pigtail, Patch Cord, UTP Cable, etc. Provide high level of technical consultation and technical services.
){kind=link}